I&J FISNAR: VC-1195A Dispensing Valve Controller

VC-1195A valve controller allows for control of one or two dispensing valves. When dispensing medium to high viscosity materials using a valve, the normal spring return action may be too slow. To speed up the return/closing cycle and to eliminate dripping, it is recommended to use the VC-1195A valve controller to control both the ON and the OFF action of the valve.

VC-1195A greatly enhances the performance of any valve designed for a 4-way operation. By using air to both open and close the valve, the valve controller provides much 'crisper' valve closing. Particularly when using the 790HP series spool valves, the VC-1195A valve controller maximizes the valve suck-back action and closes the valve more quickly, reducing material 'stringing' problems.

It is recommended that all automated / robotic dispensing applications using the 790HP series valves be installed with the VC-1195A valve controller.

For further information contact I&J Fisnar Inc.:

Tel. 201-796-1477

Fax 201-794-7034

E-Mail: info@ijfisnar.com

Internet: www.ijfisnar.com