22. Oct 2026

Cardanol PU coating mitigates ice and fouling on wind blades

Cardanol PU coating mitigates ice and fouling on wind blades
Cardanol PU coating mitigates ice and fouling on wind blades

Indian researchers have scaled up a formaldehyde-free, cardanol-based polyurethane coating that combines self-cleaning, antifouling and anti-icing properties.

The team at India’s CSIR-National Institute for Interdisciplinary Science and Technology developed the sprayable coating using a Mannich polyol derived from cardanol, a renewable material obtained from cashew nut shell liquid.

Conventional Mannich polyols are commonly produced using formaldehyde. According to the researchers, formaldehyde presents health and environmental concerns and can also cause unwanted crosslinking, oligomerization and increases in polyol viscosity.

The new synthesis route replaces formaldehyde with benzaldehyde. The resulting benzaldehyde-modified cardanol polyol had a hydroxyl value of 320 mg KOH/g and a viscosity of 120 cP. The researchers reported that it remained stable during storage without the viscosity increase associated with conventional formaldehyde-based Mannich polyols.

To produce a superhydrophobic surface, the polyurethane matrix was combined with 70-nm silica particles modified using octadecyltrimethoxysilane. Benzotriazole was added to the optimized formulation as a UV stabilizer.

The coating produced a static water-contact angle of 162° and contact-angle hysteresis below 3°, indicating that water droplets should bead and move readily across its surface.

It retained its superhydrophobic properties after 24-hour immersion tests in materials with pH values ranging from 2 to 12 and in corrosive solvents. Functional performance was also retained after exposure to −20 °C, 672 hours of outdoor weathering, 50 mechanical-abrasion cycles and 12 water-impact cycles.

Thermal testing showed stability up to 190 °C and a char residue of 64% at 800 °C.

The researchers reported self-cleaning, antifouling and anti-icing performance, which could make the coating suitable for exposed industrial structures. Potential applications include wind-turbine blades, where contamination and ice accumulation can affect aerodynamic performance and maintenance requirements.

For the prototype trial, the team increased production to a one-liter batch and spray-applied the formulation to glass and a fiber-reinforced polymer wind-turbine blade supplied by Avant Garde Innovations.

The work forms part of a CSIR-funded project running from 2024 to 2027 to scale up bio-resin formulations for multifunctional wind-turbine-blade coatings. CSIR-NIIST also lists an Indian patent application covering the benzaldehyde-modified cardanol polyol and its use in a superhydrophobic, self-cleaning coating.

The coating has not yet been reported as a commercial product. The published results cover laboratory durability testing and application to a blade prototype rather than long-term operation on a working wind turbine.

The research by Ben John and Sushanta Kumar Sahoo appears in volume 49 of Sustainable Materials and Technologies.

Photo: Wind-turbine blades are among the intended applications for a cardanol-based polyurethane coating developed with self-cleaning, antifouling and anti-icing properties. The photograph is illustrative and does not show the coated prototype. Credit: Sander Weeteling on Unsplash

Privacy settings

We use cookies on this website that are necessary for the operation of the website and therefore cannot be deselected. If you would like to know which cookies these are, you will find them listed individually in the privacy policy. Our website also uses external components that may set cookies. By loading external components, data about your behaviour can be collected by third parties, which is why we need your consent. Without your permission, there may be restrictions on content and operation. Detailed information can be found in our privacy policy.

Necessary cookies are always loaded